How Do You Fix An Orange Flame on Gas Stove: Expert Tips and Tricks

Photo of author

Gas stoves are a common appliance found in many households. While they are generally reliable and easy to use, sometimes issues can arise, such as an orange flame. An orange flame on a gas stove can be a cause for concern, as it may indicate a problem with the stove that needs to be addressed.

There are a few potential causes of an orange flame on a gas stove. One common cause is a dirty burner or igniter, which can cause the flame to burn inefficiently and produce a yellow or orange color.

Another possible cause is a lack of oxygen, which can also cause the flame to burn inefficiently and produce an orange color. Whatever the cause may be, it is important to address the issue promptly to ensure the safety and proper functioning of the gas stove.

Gas Stove

Check the Gas Valve

When dealing with an orange flame on a gas stove, it’s important to check the gas valve. This valve controls the flow of gas to the burners, and if it’s not functioning properly, it can cause issues with the combustion of the flame.

The first step in checking the gas valve is to make sure it’s fully open. Sometimes, the valve may not be turned all the way, which can cause a weak flame. If the valve is not fully open, turn it clockwise until it stops.

If the valve is fully open and the gas stove flame is still orange, the next step is to check for any obstructions in the gas line. This can include debris or dirt that may have gotten into the line and is blocking the flow of gas. To check for obstructions, turn off the gas supply and disconnect the gas line from the stove. Use a flashlight to inspect the line for any debris or dirt. If there is an obstruction, clean it out using a soft brush or compressed air.

Another possible issue with the gas valve is a malfunctioning regulator. The regulator is responsible for maintaining a consistent gas pressure, which is necessary for a blue flame. If the regulator is not functioning properly, it can cause weak or even yellow and orange flames or flame. To check the regulator, turn off the gas supply and disconnect the regulator from the gas line. Inspect the regulator for any damage or wear and tear. If it appears to be damaged, it will need to be replaced.

In summary, checking the gas valve is an important step in fixing an orange flame on a gas stove. Ensure the valve and gas range is fully open, check for obstructions in the gas line, and inspect the regulator for any damage or malfunction.

Gas Valve

Clean the Burner

To fix an orange flame on a gas stove, one of the first things to check is the burner. Over time, the burner can become clogged with food debris, cooking grease, and other particles. Cleaning the burner can help to restore the flame to its normal color.

Remove the Burner Cap

The first step is to remove the burner cap. This can usually be done by lifting it off the burner head. Some burners may have a locking mechanism that needs to be released before the cap can be removed.

Clean the Burner Cap and Head

Once the burner cap is removed, the next step is to clean the burner cap and head. This can be done using a soft-bristled brush, such as a toothbrush, and a solution of warm water and dish soap. The brush should be used to scrub away any debris that has accumulated on the burner cap and head.

For tougher stains or build-up, a mixture of baking soda and water can be used. The mixture should be applied to the burner cap and head and left to sit for a few minutes before being scrubbed away with the brush.

Reassemble the Burner

After the burner cap and head have been cleaned, they should be rinsed with clean water and left to dry completely. Once they are dry, the burner cap can be placed back on the burner head and locked into place if necessary.

It is important to make sure that the burner cap and head are completely dry before reassembling the burner. Any moisture left on the burner can cause the flame on your gas to burn orange or yellow.

By following these simple steps, the burner on a gas stove can be cleaned and restored to its normal function.

gas burner

Check the Gas Pressure

To fix an orange flame on a gas stove, the first thing to do is to check the gas pressure. If the gas pressure is too low, it can cause the flame to turn orange, which can be dangerous.

To check the natural gas and pressure, follow these steps:

  1. Turn off the gas stove and disconnect it from the gas supply.
  2. Locate the gas pressure regulator, which is usually located near the gas meter or the gas tank.
  3. Check the regulator to make sure it is set to the correct pressure. The correct pressure should be listed on the regulator or in the owner’s manual.
  4. If the regulator is not set to the correct pressure, adjust it using a wrench. Turn the adjustment screw clockwise to increase the pressure or counterclockwise to decrease it.
  5. Once the regulator is set to the correct pressure, reconnect the gas stove and turn it on to see if the flame is now blue.

If the flame is still orange, there may be another issue with the gas stove that needs to be addressed. It is recommended to contact a professional for further assistance.

Replace the Burner Orifice

If cleaning the burner ports did not solve the issue, the next step is to replace the burner orifice. The orifice is a small brass fitting that controls the amount of gas flowing into the burner. Over time, it can become clogged with debris or damage, causing the fire or flame to turn orange.

To replace the orifice, follow these steps:

  1. Turn off the gas supply to the stove and unplug it from the electrical outlet.
  2. Remove the grates and burner caps from the affected burner.
  3. Use a wrench to remove the nut that holds the burner base in place.
  4. Lift the burner base off of the stove and locate the orifice.
  5. Use a wrench to unscrew the orifice from the burner base.
  6. Install the new orifice by screwing it into place with a wrench onto your gas stove.
  7. Reassemble the burner and test it to ensure the flame is now blue.

It is important to use the correct size orifice for your stove model. Refer to the manufacturer’s instructions or consult a professional if you are unsure. Additionally, be sure to turn off the gas supply and unplug the stove before attempting any repairs.

Gas Burner

Conclusion

In conclusion, fixing an orange flame on a gas stove is a simple process that can be done by anyone with some basic knowledge of gas stoves. It is important to first identify the cause of the orange flame, which can be due to a variety of reasons such as clogged fuel burners, dirty gas ports, or low gas pressure.

Finally, remember that a gas stove is not a vented appliance. Therefore, you should only use it for cooking, not heating. If you do see orange flames, this could indicate a higher level of carbon monoxide, which is why you need to call a professional as quickly as possible.